EMT Practice Test

1. Question Content...

---

Question1: An enterprise has a network with Communication Server 1000E systems running RIs 7 x IP Peer Network.
For this network, when are the Digital Signal Processor (DSP) resources required?

Question2: You are using Element Manager to program a Route List Index (RLI).
Which Electronic Switched Network (ESN) parameters must you define to be able to successfully program an RLI?

Question3: Which Overlay (LD) is used to find an unused card slot (LUC) for a new Digital Line Card that will support five digital telephones?

Question4: A customer site has a Communication Server 1000 system located at us main campus and wants to network me system for direct calls with a system in a different city.
Which type of steering code is required to route calls over specify trunk routes between the two sites?

Question5: Click the Exhibit button.


An employee at a company is placing a call to telephone number 214-774-3299. The employee, believing this is a toll call, dials 9-1-214-774-3299. However, this call is a local call.
Access Code 1 = 9
The Central Office utilizes a 7-digital dialing plan.
Given the DMI indexes programmed into this Communication Server 1000 shown in the exhibit, which DMI would be used to modify the dialed digits to outpulse the correct digits to the Central Office?

Question6: A company recently deployed IP telephones in its Call Center. During peak traffic conditions, callers receive an overflow tone and calls are blocked.
Zone Number = 1
Zone Intent = MO
Intrazone Traffic = Best Quality
Interrone Traffic = Best Bandwidth
Resource Type = Shared
Which programming change is recommended to provide dedicated Digital Signal Processor (DSP) resources to Contact Center IP telephones?

Question7: The Satellite Link Control feature ensures that the configuration of a call does not include more than one communications satellite trunk. Tandem trunk calls, when connected through more than one communication satellite trunk, are subject to transmission distortion due to propagation.
Which parameters are required to be equipped or configured for Satellite Link Control in the Communication Server 1000?

Question8: A customer is using Zone Based Dialing in their Networked Communication Server 1000 systems. Which prompt has been added to the telephone configuration overlays to allow IP telephones to be configured for this?

Question9: Click the Exhibit button.

Consider the customer's current programming:
NCOS of 2 = FRL of 2
Class of Service on all sets is CTD
With reference to the exhibit, how would you modify Route List Index 1 to permit all station users with an NCOS of 2 to place 1+912 calls?

Question10: Click the Exhibit button.

A customer requires that two of its employees be able to place toll calls to Australia, while all other employees are restricted to local dialing only. The customer's Communication Server 1000 is programmed with all required NCOS, FRL and Route List Index (RLI).
What is the most restrictive NCOS to assign to the two employees required to make toll call Australia given the tables, assuming that the call must complete over RLI 2 and the user must be able to use any RLI 2 entry to reach Australia?

Question11: Click the Exhibit button.

Consider the a customer's dialing plan shown in the exhibit, which detail on-net and off-net dialing requirements:
TIE trunks between Location A and Location B are currently out of service.
TIE trunks between Location B and Location D are currently out of service.
All over TIE trunks are fully functional.
Which route will a call to LOC 304-2001 take if it originates from location B?

Question12: The Allow Last Digit Repeat function permits a repeated last digit of an ESDN to terminate the call immediately, similar to pressing the octothorpe (#) key. This prevents an ESA call from being dropped if the last ESDN digit is accidentally dialed again, but also processes the call immediately, rather than allowing an extended pause waiting for an additional digit.
To use this feature, which task must you complete first?

Question13: Click the Exhibit button.


A customer has asked if the Communication Server 1000 RIs. 7 x system can provide Exchange users with the ability to selectively drop people that have been added to a conference.
Based on the print-outs, what capabilities are currently available to the user of extension 2006?

Question14: An administrator is programming an NRS for the first time on a new Communication Server 1000 system RIS. 7.0 system. When attempting to add the Service Domain, it cannot be added as the Add button is grayed out in the NRS.
Which tasked should you perform to resolve this issue?

Question15: A customer has just deployed a new Communication Server 1000 RIs. 7 x High Availability system. You have been instructed to configure the required virtual routes to comply with the company's dialing plan strategy.
Which Feature Package must be enabled to allow virtual routes on the system?

Question16: When deploying ESA for IP telephones, a method for determining the location of the IP telephones is required. If you are deploying internally, what would one method be?

Question17: Click the Exhibit button.

You are asked to review the existing route information for the customer.
According to the printout shown in the exhibit, which type of route is this?

Question18: A customer has deployed a Communication Server 1000 RIs. 7 x system at their site. Their sales department is expanding and you have been asked to add Ave new telephones with the same capabilities as the existing telephones in the department.
Which programming command should you use to complete this task?

Question19: A company plans to use Virtual Trunk Interzone traffic. You are programming a bandwidth management zone on a Server 1000 RIs. 7 x Call Server. Which is the recommended bandwidth management strategy, assuming that bandwidth conservation is required?

Question20: In order for Zone Based Dialing On-Net Call routing (Inter-site) to be used, users are required to dial an
E.164 number (either International or National number), for calls between sites.
For this to be true, and for the system to pass the proper Calling Line ID (CLID), which prompt must be configured?

Question21: Click the Exhibit button.

Refer to the customer's dialing plan and programming show in the exhibits.
Assuming all required Route List Indexes have been programmed, why will the station user's dialed call of
8-1-717-398-8001 not complete?

Question22: Click the Exhibit button.

You manage a Communication Server 1000 RIs. 7 x system at a customer site. The customer reports that extension 2000 cannot make an unassisted long distance calls.
With reference to the exhibit, which feature is restricting the user?

Question23: Click the Exhibit button.

You are responsible for maintaining a small Communication Server 1000 RIs. 7 x SA system. The customer decided against using Basic Automatic Route Selection (BARS) for call routing. They are now reporting that the user of extension 2001 is blocked when attempting to dial local call using the COT access code.
Based on the exhibit, what adjustments should be made to the system to allow the user of extension 2001 to dial local calls only by directly accessing the COT Route?

Question24: An existing customer upgraded to Communication Server 1000 RIs 7.5 but plans on staying on an H.323 network environment until their key systems in the network get upgraded to SIP. Their last 7.0 system is just now being put into service and you are configuring the H.323 Gateway Properties using Element Manager.
What is the correct entry for the Primary Gatekeeper IP address?

Question25: Click the Exhibit button.

The local Central Office required that all calls dialed utilize dialing, however users forget to dial the NPA for local calls. Which DMI entry would be utilized to insert the NPA of 214 when a user dials 9-774-3299?

Question26: A customer has deployed a Communication Server (CS) 1000 RIs. 7 x system at their site. They have asked you if the CS 1000 has a feature that can extend and ring calls to other locations. You have decided that Personal Call Assistant (PCA) will meet the customer's requirements and verified that the system is equipped with Package 398, and that it has sufficient ISM parameters. Which step must be performed first when implementing PCA?

Question27: Due to Directory Number conflicts in the Communication Server 1000 network, the customer wants to route calls by Home Location Codes (HLOC) and Location Codes (LOCs).
Consider the following Home Location Codes.
HLOC for system A = 329
HLOC for system B = 429
What LOC should be provisioned for system A?

Question28: Click the Exhibit button.

Given a company's dialing plan shown in the exhibit, if a station user at the company in New York City dials 8-890-4233, what will happen to the call?

Question29: Your customer has a Communication Server 1000 RIs. 7 x system equipped with System Errors and Events Lookup pack 245 that provides the ability to display system messages on screen.
When a system message in received, which procedure should you use to look it up and display it on the screen?

Question30: Which IP Peer Networking component provides the centralized call routing for Communication Server 1000 systems in an Avaya Aura network solution?

Question31: Which functionality do TIE trunks provide?

Question32: Click the Exhibit button.

Given a company's dialing plan shown in the exhibit, if a station user at the company in the New York City is attempting to place a call to Albany and the station dial AC1+661+7449, what will happen to the call?

Question33: Click the Exhibit button.

Given the customer's programmed database shown in the exhibit and AC 1 = 9, over which RLI will a call placed to 9-1-912-534-2222 complete?

Question34: Click the Exhibit button.
%

You are asked to review the existing trunk information for your customer.
According to the Element Manager screen capture shown in the exhibit, which type of trunk is this?

Question35: Click the Exhibit button.

Consider the customer's dialing plan shown in the exhibit.
Which number used for the NARS AC1 access code?

Question36: Click the Exhibit button.


A customer has deployed a Communication Server 1000 RIs. 7 x system at their site. You have been asked to swap two telephone sets shown in the print-outs.
What win you ten me customer regarding this request?

Question37: Click the Exhibit button.

Given the customer Route List index shown in the exhibit, what is the first expensive route that a call placed on that RLI could take?

Question38: Click the Exhibit button.

A customer requires that Distinctive Ringing on a route be allowed.
Which programming within the Customer Data Block (LD 15) indicates the number of times the call receive a distinctive ring before redirection?

Question39: The Directory Number range for a customer dialing plan is 2500-2599.
Which entry indicates the number of digitals of the CDP Dialed Number (NCDP) for this dialing plan?

Question40: Given the following network characteristics:
three Communication Server 1000 RIs. 7 x systems

IP Peer Networking required

DN uniqueness cannot be maintained

route calls using site Location Codes (LOCs)

Which type of dialing plan is recommended for this call routing scenario?

Question41: You are configuring a bandwidth management zone on a Communication Server 1000 RIs. 7 x Call Server.
The Call Server zones will be used for interface communications between endpoints (IP telephones and gateways).
Which is the preferred bandwidth management strategy, assuming the network has adequate bandwidth?

Question42: Click the Exhibit button.

A customer has asked if the Communication Server 1000 RIs. 7 x system can route anyone that dial an unassigned number in the customer's DID range to the Attendant.
In reviewing the current configuration as shown in the exhibit, what do you conclude?
(Choose two)

Question43: You are responsible for maintaining the Communication Server (CS) 1000E release 7 x system installed at your customer's district office. They would like to use Corporate Directory Feature are accurate? (Choose two)

Question44: With Automatic On-Net to Off-Net Overflow, if all on-net facilities such as TIE trunks between locations are busy, NARS can convert a dialed UDP number to a Listed Directory Number of the applicable DID number at that location and use off-net facilities, such as CO trunks, to complete the call. When provisioning Automatic On-Net to Off-Net Overflow, which parameter is not correct?

Question45: A customer would like to simplify their network administration by migrating existing Communication Server (CS) 1000 RIs. 7 x system in multiple locations into a single centrally deployed CS 1000 system. They want this change to be transparent to the end users so that can continue to use the same dial plan and features currently in place.
Which feature can you implement to meet the customer's requirements?

Question46: Click the Exhibit button.

A customer wants to allow a station user to save an incoming number (Off-Net, Local Number) to their Personal Directory and afterwards use it to place an outgoing call without having to perform an manual manipulation to the number.
Consider the customer dialing plan shown in the exhibit.
Communication Server 1000 is configured for DAPC = YES in the Route Data Block.
With reference to the DAPC Table options in the exhibit, which Dial Access Prefix on CLID (DAPC) table should be used?

Question47: You have just created 10 new 1140E IP DeskPhone for your customer using Element Manager. Using accessing Subscriber Manger to assign the users to those newly created telephones, you notice that the telephones do not appear in Subscribe Manager database.
Which Subscriber Manager synchronization mechanism updates the Subscribe Manger database with the Communication Server 1000 Element Manger database?

Question48: When attempting to program Zone Based Dialing through Element Manager, the user is unable to access the Dialing Configuration Page.
What needs to be configured before the Dialing Configuration Page can be accessed, assuming the ZBN_PACKAGE (420) is already installed?

Question49: Click the Exhibit button.

Given the customer's programmed database shown in the exhibit and where AC1 = 9, which RLI will call complete when a station user dials 9-814-666-3434?

Question50: Click the Exhibit button.

A customer has a Communication Server 1000 RIs. 7 x system with System Manger / Unified Management (UCM) enabled. They have requested the addition of two new UCM Administrator User with the limited ability to provision telephones at each site. Refer to the exhibit for the roles current existing in the system.
Which action can the Network Administrator take to add these new accounts per the customer's requirements?

Question51: Click the Exhibit button.

You are adding ten digital telephones as required by a customer work order. The customer wants the user to see the calling or called name associated with the number dialed.
Which Customer Level feature from the list shown in the exhibit, must first be provisioned before you can enter names in at the station level?

Question52: To enabled and configured SIP on a Communication Server 1000 system, which software component on the IP Telephone Node must you enabled first using Element Manger?

Question53: A customer has a Communication Server 1000 RIs. 7 x system at their site. You have been asked to add the Call Pickup feature to the ten IP telephones in the sales department. The customer wants to be sure active calls are not lost when the change are made.
Which Phones Configuration feature can be enabled allowed you to ensure changes to the telephones are not transmitted to the call server until the telephone is not busy?

Question54: Click the Exhibit button.

Consider a customer's dialing plan and programming shown in the exhibit.
Assuming all required Route List indexes have been programmed, why will the station call of 6-544-3333 not complete?

Question55: Click the Exhibit button.

Consider a company's dialing plan shown in the exhibit and an example for its requirements:
A station user at the company, with Location Code 221, placed an ESN call, dialing 7-221-2581. This would be an On-Net call and the NARS programming must remove the LOC code and dial the DN internally.
What programming would remove the location code for a call dialed within the originating Communication Server 1000 to a DN on that same Communication Server 1000?

Question56: What new prompt is added to an IP set configuration to allow for assigning a set for Zone Based Doling?

Question57: Click the Exhibit button.

Given the SDRR programming options shown in the exhibit, which SDRR programming would allow a user to dial 1-900-867-3333, but not successfully dial any other 1-900 based number?

Question58: You are using Element Manager to verify the system configuration before implementing IP Peer Networking. Which element can you configure or modify using Element Manager?

Question59: For a situation where you use the CDP feature at a switch equipped with the MARS software package, which statement are correct? (Choose two)

Question60: In order to set up the Customer Data Block within Element Manager to support Zone Based Dialing, and assuming Package 420 ZBD Package is installed and active, what needs to be done first?

Question61: You are implementing IP Peer Networking in a Communication Server 1000 network. For correct call routing, the digits dialed by users must be manipulated to conform to the dialing requirements of the trunk.
Which statement describes a property of digit manipulation?

Question62: Click the Exhibit button.

A Communication Server 1000 RIs. 7 x customer is adding a new Human Resource department with eight IP telephone users. The customer has asked for the telephones to be programmed with consecutive Directory Number (DNs) from their DID range (2000-2099).
Which number sequence is available to meet the customer's requirements?

Question63: Click the Exhibit button.


Given a customer's Coordinating Dialing Plan shown in the exhibit, if a Station user at CDP Switch #2 dials
327-3249, which route list used and where will the call terminate?

Question64: When configuring Zone Based Dialing, what option would you select to create new zones for routing calls through a centralized Call Server?

Question65: Click the Exhibit button.

A customer's dialing requirement, listed below, require that all station users assigned an NCOS of 3 and Class of Service of Conditionally Toll Denied (CTD) be able to place toll calls from the United States to Australia.
Australia Country Code: 61
NCOS of 3 has an FRL of 3
Expensive Routers are not being used
With reference to the exhibit, which table will allow all station users to be able to place these toll calls?